同步带官网Brecoflex同步带总代理Continental马牌人字齿同步带皮带轮

同步带官网Brecoflex同步带总代理Continental马牌人字齿同步带皮带轮在全球的员工大约27,250人。在27个国家设有75个分支结构,另外有40个研发机构和销售部门。若想与康迪泰克合作,全球任何地方都能找到我们的合作伙伴。

    特定凸齿抗剪强度取决于转速。特定凸齿**抗剪强度为连续工作条件下带齿所能承受的极限负荷。其值在各类同步带的表格中均有说明。只要不超过凸齿容许抗剪强度，同步带驱动装置的设计均为正确。通常来说，不需要特殊的安全系数，见“安全系数”一章。

    多个带齿在带轮中啮合时，工作负荷可以更有效地进行分布。Brecoflex官网由于 CONTI® SYNCHROFLEX同步带的节距精度较高，通常情况下，可以用啮合的12个带齿进行计算，除非实际啮合的数量低于12个。

The specific tooth shear strength depends on the rotational speed. The maximum specific tooth shear strength is the limit load the belt tooth can bear in continuous operation. The values are stated in tables for each timing belt type. The timing belt drive is correctly designed, when not exceeding the admissible tooth shear strength. Generally, a special safety factor is not necessary, see chapter „Safety factors“.

The working loads can be distributed more effectively with more belt teeth meshing in the pulley.

Due to the high pitch accuracy of CONTI® SYNCHROFLEX Timing Belts, generally, it can be calculated with 12 belt teeth in mesh, unless there are less than that number actually in mesh.同步带